Need Help?
support@steelbayautomotivesupply.com
Replies within one business day
Replies within one business day
Atlas Capacity Base plate 2 Post Lift XH-TPF-9 9,000 lb
$2,849.00
Atlas Capacity Base plate 2 Post Lift XH-TPF-9 9,000 lb
The light duty Atlas® TPF-9 lift is an economically designed baseplate 2-post lift. The reliable chain-drive cylinders and dual safety system make this the perfect choice for “Mr. Homeowner” or small commercial shops looking to service cars, SUV’s and light duty trucks. The TPF-9 has an overall height under 9 feet 4 inches. The Atlas® TPF-9 has symmetric columns and symmetric arms. The low pad height will allow the operator to position the lift arms under most small cars (with low pick-up points) and heavier pickup trucks. The Atlas® TPF-9 two post “chain over roller” lifts have a spring-loaded Secondary Lock System (SLS) that automatically engages in the event of a slack or broken chain.
Atlas Capacity Base plate 2 Po...
$2,849.00
Need Help?
support@steelbayautomotivesupply.com
Replies within one business day
Replies within one business day
Atlas Capacity Base plate 2 Post Lift XH-TPF-9 9,000 lb
Features and Benefits:
- 9,000 lb. Capacity
- Baseplate, Open Top design
- Overall Height: 111 1/2″ (9′ 3 1/2″)
- Symmetric Arms
- Automatic Arm Restraints
- Dual-Point Lock Release
- Rubber Guards on Carriages
- Dual Hydraulic Chain-Drive Cylinders
- Secondary Lock System
- Adjustable Screw-Up Adapters Included
- Free 4 Piece Truck Adapter Set
- Free set of Sliding Arm Adapters
- Mounting Hardware Included
- Shipping Weight: 1,400 lbs.
- 2 yr Structural ‐ 1 yr Hydraulic Warranty ‐ Parts Only
- This part number FREIGHT PREPAID
Specifications:
- Capacity 9,000 LB.
- Overall Height 111 1/2” (9′ 3 1/2″)
- Overall Floor Width 133 1/2″ (11′ 1 1/2″)
- Maximum Lift Height (Without Adapters) 76 1/2″
- Maximum Lift Height (With Adapters) 79 1/2″
- Minimum Arm Height 4″
- Inside Column 111 3/8” (9′ 2 3/8”)
- Drive Thru 98 1/2” (8′ 2 1/2”)
- Column Size 7 1/4″ x 11″
- Column Thickness of Steel 5mm
- Base Of Lift 14 1/4″ x 18″
- Motor/Electrical Requirement 220 volt single (1) phase. (A 30 amp breaker is recommended)
- Oil Requirement 3-5 Gallons AW32/AW46 (NOT INCLUDED)
- Shipping Weight 1,400 LBS.
- Adapter Heights 4 Each 2.75″
- Arm Hole/Adapter Peg Size 2”
- Requires a minimum of 4″ of concrete with a 3000 psi. rating
